Izdelki za del motorjev (48)

Il M9DT30 è un carro raccoglifrutta semovente progettato per la raccolta e la potatura nei moderni impianti ad interfilare ridotto. Questo modello offre un piano di lavoro unico ad elevazione idraulica, con larghezza chiusa di 1,30/1,50/1,70 metri, apribile fino a 2,28/2,80/3,10 metri. La lunghezza del piano è di 2,00 metri, con un'altezza massima di 2,46 metri. Equipaggiato con 4 ruote motrici e sterzanti indipendenti, il M9DT30 garantisce una manovrabilità eccellente. Gli elevatori idraulici anteriori e posteriori facilitano il carico e scarico dei bins, mentre la trasmissione idrostatica e il cambio a due rapporti a comando elettrico assicurano un controllo preciso della velocità.

IGP threaded tank cap in stainless steel and plastic material, complete of sealing gasket. Different threads are available: 1” 1/2 male (standard thread; for a perfect match, we suggest to combine our threaded cap with our G 1″.1/2 female threaded filling systems) P3 female (non-standard thread, compatible with our P3 filling system). It is available hermetic, ventilated or equipped with controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the IGP tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. IGP threaded fuel plug can be provided with removable filter and/or safety chain or cable; it can also be customized with company logos, writings and drawings. CATEGORY:Caps / Plugs COMPONENTS:Sealing Gasket

D.60.TE fuel tank cap with key, in plastic material, hermetic, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. This product is equipped with lock protection door with “DIESEL” writing, to protect it from dust, debris residues and rainwater. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our bayonet filling systems passage 60 mm. The D.60.TE tank cap with key is mainly used in truck tanks, on agricultural and construction equipment, and in power generator tanks. We guarantee always quality and reliability of our product. PASSAGE DIAMETER:60 mm Passage

D.40 G 1.1/2″ tank cap, male threaded, in plastic and steel material, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be proposed in 4 colors (black, blue, red, green) for various needs in different sectors; it can also be equipped with removable filter and/or safety chain or cable. This product is customizable with company logos, writings and drawings. We manufacture types with all metal components in stainless steel for nautical applications and corrosive environments. D.40 G 1.1/2″ filling plug is also used in hydraulic field, such as on hydraulic power units. For a perfect match, we suggest to combine our threaded cap with our G 1”.1/2 female threaded filler neck. The adoption of accurate production processes performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. CATEGORY:Caps / Plugs PASSAGE DIAMETER:45 mm Passage

ASM.CB fuel tank cap, in aluminium and steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.CB tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions equipped with safety chains or cables and with customized writings, company logos and drawings on request. This product shall be sold with our bayonet filling systems passage 40 mm. Thanks to its ergonomic design and its technical features, the ASM. PASSAGE DIAMETER:40 mm Passage

TED tank cap for oil and fuel, in steel and stainless steel material, with internal bayonet coupling passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the TED tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments and Urea solutions (AUS 32 (AdBlue®)). The steel version can be supplied also in black color. PASSAGE DIAMETER:30 mm Passage

TED tank cap with key for oil and fuel, in steel and stainless steel material, with internal bayonet coupling passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. The steel variant can be supplied in black version. At your request, the TED filling plug with key can be equipped with safety chains or cables. This product shall be sold with our internal bayonet filler necks passage diameter 30 mm or with our niche series 45 for connection to oil or fuel flexible fuel hose Ø 45 mm. The TED fuel tank cap with key is used for different applications in several industrial fields, and, thanks to its small size and its high quality, it is particularly suitable in the fields of pneumatics and oil-hydraulics, as well as oil cap in generating sets, earth moving machines, excavators and so on. PASSAGE DIAMETER:30 mm Passage

P3 tank cap for gasoline, diesel or biodiesel and cleanser, female threaded, in plastic material, passage diameter 32 mm with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the P3 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. On request, we can supply versions with different colours, customized writings and logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter. CATEGORY:Caps / Plugs PASSAGE DIAMETER:32 mm Passage

P3 filler neck male threaded, in steel or aluminium material, passage diameter 32 mm, to be welded on tanks or to be connected to flexible pipes for fuel, hydraulic oils and other fluids. This product is available in different materials and, on request, we can provide it with vent connection, removable filter or welded to a suitable fixing plate. P3 filler neck is supplied in combined with our P3, PGE and IGP threaded tank caps and it is generally used on tanks of construction and agriculture vehicles, such as earth moving machines and motor mowers, on machines for cleaning and environment and in fuel and oil tanks of special vehicles, such as go-karts and remote controlled model cars. For more details on the variants and threads of the filler neck P3 special thread, we invite you to consult the data sheets from the widget below. The use of accurate production processes in all phases and the careful selection of raw materials guarantee quality and reliability of our product over time. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:32 mm Passage

960 tank cap female threaded, in plastic material, passage diameter 22 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and in different colours on request. The special threaded filler neck profile, compatible with 960 cap, is obtained directly from the tank molding. 960 filling plug is used in different building and agriculture applications, especially on auxiliary water and oil tanks of small sizes. For more details on the variants and threads of this tank cap, we invite you to consult the data sheets from the widget below. The careful selection of raw materials and the adoption of accurate production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:22 mm Passage

Cases for deck filler 32-40-50 mm series in technopolymer, for connection to filling flexible hose with three different diameters: Ø 32 mm (for water) Ø 40 mm (for fuel) Ø 50 mm (for fuel). These niches are supplied in combination with three possible our internal bayonet tank caps passage diameter 40 mm: 240 tank cap AIR tank cap V7 S tank cap It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster. We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank. CATEGORY:Niches / Deckfill Holder PASSAGE DIAMETER:40 mm Passage

GR fuel tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in steel and stainless steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. The steel version can be also supplied with black cap covering. This product shall be sold with our bayonet filling systems passage 40 mm. The shape of GR filling plug facilitates its handle even when the operator is using work gloves: it is therefore mainly used in agricultural and building sectors, in particular on tanks of agricultural machines, earth moving machines and building machines. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. PASSAGE DIAMETER:40 mm Passage

D.60 steel fuel tank cap for gasoline, diesel or biodiesel, internal bayonet coupling passage diameter 60 mm, with sealing gasket. It is available hermetic or ventilated and, at your request, we can supply it in different colors for various needs in the fields of use and it can be equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm, which can be possibly provided with anti-syphon device or removable filters. Thanks to its feature and its ergonomic design, the D.60 cap with key is widely used on tanks of trucks, on building and agricultural machines, on earth moving machines, on generating sets tanks and so on. We aways guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. PASSAGE DIAMETER:60 mm Passage

D.96 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and diameter of cap covering 96 mm. This cap is equipped with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and, at your request, in varied colors for various needs in different sectors. We can propose this product equipped with safety chains or cables or in a version with padlock, thanks to the Ø 96 mm cap covering. We manufacture types with all metal components in stainless steel for nautical applications, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®). This product shall be sold with our bayonet filling systems passage Ø 40 mm or with our niches for connection to flexible fuel hose Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs. PASSAGE DIAMETER:40 mm Passage

AIR RCM spare cap with key for camper, caravan and motorhome in technopolymer and aluminium material, with internal bayonet coupling passage diameter 40 mm and aluminium reduction flange, suitable for diesel, gasoline and water tanks. We supply this cap in black, in grey or white color and, on request, with fixed code double key, for opening more caps with the same key. The AIR RCM spare cap is combined with our aluminium reduction flange, which allows an easy and quick replacement of the existing loading system, without having to modify the wall panels of the camper, caravan and motorhome. The following video shows the sequence of the substitution phases: Versions with ventilated cap, or hermetic are available. Our vent connection can be mounted on the loading system, according to your specific requirements. List of components included in kits with reduction flange: AIR cap 240 Loading system with external reduction flange in aluminium PASSAGE DIAMETER:40 mm Passage

R tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in steel and stainless steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. The steel version can be supplied also with black cap covering. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, pushbutton actuator with key, handle with key, selector switch activator key). Our keys with code 455 are perfectly interchangeable with the other ones with same code on the market. You can find more information about our key with code 455 in our News section. On request we can supply variants equipped with safety chains or cables. PASSAGE DIAMETER:40 mm Passage

690 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated. We can propose this product in a wide range of colors (black, gray, blue, red, green) for various needs in different sectors and, at your request, equipped with safety chains or cables. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). This product shall be sold with our bayonet filling systems passage Ø 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customize in relation to your specific needs. PASSAGE DIAMETER:40 mm Passage

D.80 fuel tank cap with key, in plastic and aluminium material, ventilated, with internal bayonet coupling, passage diameter 80 mm with sealing gasket. This product is equipped with lock protection door to protect it from dust, debris residues and rainwater and, at request, we can supply this cap also with fixed code key and with safety chains or cables. The D.80 fuel tank cap with key shall be sold with our bayonet filling systems passage 80 mm and it is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture machines, earth moving machines, and so on. We guarantee always quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:80 mm Passage

ASM.CF tank cap, 2” female threaded, in aluminium material, complete of different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated or equipped with a controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.CF tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. The ASM.CF fuel plug can be equipped with a removable filter and/or safety chain or cable. This product particularly lends itself to customizations with writings, company logos and drawings. CATEGORY:Caps / Plugs PASSAGE DIAMETER:54 mm Passage

D.60 BC steel fuel tank cap with key for gasoline, diesel or biodiesel, ventilated, with internal bayonet coupling, passage diameter 60 mm with sealing gasket. At your request, we can supply it equipped with safety chains or cables. This product shall be sold with our niche series 70 for connection to flexible fuel hose passage Ø 70 mm or with bayonet filling systems passage 60 mm which can be possibly provided with anti-syphon device or removible filters. Thanks to its feature and its ergonomic design, the D.60 BC cap with key is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture.machines , earth moving machines, and so on. We guarantee always quality and reliability of our product. PASSAGE DIAMETER:60 mm Passage

D.80 tank cap in galvanised steel, with internal bayonet coupling passage diameter 80 mm, with sealing gasket. It is available ventilated and equipped with safety chains or cables. The D.80 fuel tank cap shall be sold with our bayonet filling systems passage 80 mm and it is used for different applications in several industrial fields, such as tank of generating sets, truck, building and agriculture machines, earth moving machines, and so on. We guarantee always quality and reliability of our product. We perform several strength and durability tests and test for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:80 mm Passage

PGE tank cap female threaded in aluminium, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be proposed in 3 standard colors (black, blue, red, green) for various needs in different sectors; on request we can also consider its realization in other special colors (for example gold color). This product can be also equipped with removable filter and it is compatible with our P3 filling system. PGE filling plug is mainly used on auxiliary water and hydraulic oil tanks. Thanks to its small dimensions and ergonomic design, it is also used on go-kart tanks or in fuel remote controlled model cars. The adoption of accurate production processes performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. CATEGORY:Caps / Plugs PASSAGE DIAMETER:32 mm Passage

950 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 950 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. 950 fuel tank plug can be supplied in different colours on request. The trapezoidal threaded filler neck profile, compatible with 950 tank cap, is obtained directly from the tank molding. The ergonomic design makes the handle easier also when the worker uses his working gloves; PASSAGE DIAMETER:32 mm Passage

Plastic Emergency stop push button switch protective cover with aluminium silkscreened plate. This product can be supplied in a wide range of colors (black, blue, red, green) for various needs in different application sectors. On request, we supply the protective niche already completed with emergency stop push button. New rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster Our plastic cover protector for stop Emergency push button allows it to be recessed near the machine control panel, as required by the EN ISO 13850: 2015 art. 4.5, in order to prevent accidental activation of the emergency stop device. Our niche is used in many application, such as generating sets soundproofed enclosures. CATEGORY:Niches / Deckfill Holder COMPONENTS:For Emergency Buttons

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. We can propose this product in a wide range of colors (gray, blue, red, green, white) for various needs in different sectors and, at your request, equipped with safety chains or cables or lock protection door to protect it from dust, debris residues and rainwater. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, Pushbutton actuator with key, Handle with key, Selector switch activator key). PASSAGE DIAMETER:40 mm Passage

Filler necks internal bayonet coupling passage diameter 30 mm, in steel or galvanized steel, to be screwed, welded or pressed on tank. They are available in different lengths and possibly equipped with vent / breather connection. In the following section you will find the most common versions of internal bayonet filler necks passage diameter 30 mm: for more details, please refer to the product’s technical sheet. This products shall be sold in combination with all our internal bayonet tank caps passage diameter 30 mm. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:30 mm Passage

M60X2 filler neck male threaded, to be screwed, welded on tanks or connected to filling flexible pipes for fuel, hydraulic oils and other fluids. This filler neck is available in different lengths, materials and types. On request we can provide it with removable or fixed filter or complete filling systems with flexible pipes. M60X2 filling system can be combined with our Niches 60 F series or directly with our ALU M60X2 and M60X2 with key threaded caps. Available versions with vent/breather connection and types in stainless steel for nautical applications and corrosive environments. The adoption of accurate production processes also performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:54 mm Passage

D.96 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and diameter of cap covering 96 mm. The cap is equipped with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and, at your request, we can supply it in a wide range of colors for various needs in different sectors. On request we can equip this cap with safety chains or cables, as well as with protection door for lock, to protect it from dust, debris residues and rainwater. The D.96 fuel cap shall be sold with our bayonet filling systems passage 40 mm, with our niches for connection to flexible fuel hose Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs. PASSAGE DIAMETER:40 mm Passage

P3 oil tank cap female threaded, in plastic material, passage diameter 32 mm with NBR sealing gasket. It is available hermetic or ventilated. On request, we can supply versions with different colours, customized writings and oil logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter. It is however possible to obtain the threaded filler neck profile directly from the tank molding. P3 oil tank cap is generally used on tanks of building and agricultural vehicles, such as earth-moving machineries, on machines for cleaning and environment and on oil tanks of special vehicles. The use of accurate production processes in all phases and the careful selection of raw materials guarantee quality and reliability of our product over time. CATEGORY:Caps / Plugs PASSAGE DIAMETER:32 mm Passage